Barum BU 49 - the universal tyre for all axle positions

The Barum BU 49 is a universal tyre for trucks, which are used as a dump truck or concrete mixer on construction sites. It can be mounted on all axle positions and is also suitable for short distances on asphalt. A dual tyres for construction vehicles has Barum with the Barum BS 73 .

Construction is ...

... If tyres need to carry heavy weight on inaccessible terrain daily. Here are the highest security against breach of the tyre maximum traction strength of the profiles and an above average service life of the stuff of the economic tyres. The tubeless (TL) radial tyre (R) Barum BU 49 can carry loads up to a maximum weight of 4,500 kg (LI = 160) at a top speed of 110 km/h (SI = K) and is available in the following dimensions: 385 / 65R22 .5 160K TL. To 49 increase the mileage of the Barum BU still, it can be trimmed, which can be seen on the inscription "REGROOVABLE". Its average depth is 3.5 mm, and its cutting width 13.0 mm. Once the profile of the tyre is worn to 3 mm, should be recut. It should be noted, that must be carried out a recutting only by appropriate professionals. Otherwise, premature failures could be the result.

durable tradition - Barum BU 49

The Barum BU 49 comes from a blacksmith with a long tradition. Barum arose among others from the shoe manufacturer Bata. As early as 1924 finished Bata - an undertaking established in Czechoslovakia companies - rubber soles. Seven years and many experiments and development steps later Bata begins production of bicycle tyres. Three years later, car tyres are added. 1945 bundle Bata in Zlín, Rubena in Náchod and Mitas their experience in the rubber industry and establish Barum. Since then, the tyre specialist develops affordable quality tyre with long life.

The Barum BU 49 is on rough surfaces safely propelled favorable traction tyres for every type of site traffic.